BenchDELUXE Labeling Machine
This is the best value for money. The BenchDELUXE Labeling Machine is the premium of all semi automatic-labelling machines. High throughput, high production with guaranteed label accuracy. This versatile industrial machine will reduce your double handling by at least 3 times. See here
A reliable ‘On Demand’ labelling solution that will not let you down in your most critical times. You can use any type of label on any round container. Straight out of the box you can be labelling within 4 minutes on any product.
The BenchDELUXE Labeling Machine will reduce your labour cost and also the expense of wasted labels. The BenchDELUXE Labeling Machine can save 15 – 20 meters of wasted labels every day.
The BenchDELUXE has the capacity to label products in millions while having the flexibility to meet short run packaging needs.
With our 5 year warranty you can be assured that it will not break down in your most critical production times. We are happy to offer you a 7-day free trial and should the labeller not meet your expectations then we would be happy to refund your money or credit the full amount towards an alternative labeller from our range.
Orientation is the ability to scan a container for a registration mark and then apply a label or set of labels tied to this registration mark. This feature is unique to Great Engineering labellers.
Our Orientation feature uses a colour and texture sensor to scan your container. We then amplify the signal and using our proprietary electronics we can precisely apply your labels.
Automatic Attachment Option
The Automatic attachment will reduce your double handling by 3 times.
Without this option you will
- Take your containers to a bench or table
- Label them.
- Then pack them into a box.
When analysing your production line, look at your bottleneck. This should be the filling process. Fillers normally run at 8 – 16 per minute. We recommend positioning the BenchMAX or BenchDELUXE next to the operator who does the capping.
The capping operator has enough time to cap, label and pack the container while the container is being filled. With the Automatic Attachment you will increase your throughput and control application pressure and repeatability.
Small Container Adaptor Option
The Small Container Adaptor can be added to any of our machines.
When added to the BenchMAX or BenchDELUXE you can label container diameters from 8mm.
When added to the BenchMATE or BenchMARK you can label container diameters from 18mm.
- On edge, no registration mark required.
Wastage per roll:
- Pressure sensitive, die-cut, roll-formatted, Fan Folded
- Opaque, clear, translucent.
Single, front & back, or wrap-around labels
- Minimum 0.02mm (0.002 inches)
- Greater than 25mm (1 inch)
- Minimum 10mm (3/8 inches)
- Maximum 230mm (9 1/4 inches)
- Left Hand Leading Edge (Internal or Externally wound)
- Maximum 300mm (12 inches)
Roll Core Diameter:
- 38mm (11/2 inches) and 76mm (3 inches)
Container, Power & Dimensions
Suitable for round containers
- Minimum 50mm (2 inches)
- Maximum 110mm (41/2 inches) Standard
- Maximum 250mm (9 3/4 inches) with removable handle.
- 110 or 240 AC <1 AMP
- Anodized 6061 Aluminum
- Food grade Stainless steel shafts and bolts.
- 59 (24.4 inches) x 61 (23.5 inches) x 44cm (15.4 inches)
- Weight 32kg (70.5 lbs)